A&P Hydraulics

  
Tel: 910-371-1151
302 S. Shamrock Ave, Landrum SC, 29356


Series 930 Hydraulic Test Stand 50 - 80 GPM completely independent Dual System hydraulic test stand

Series 930, Completely Independent Dual System Hydraulic Test Stand

The Series 930 hydraulic test stand features a completely independent dual system; each system may be used independently or combined together for maximum flows.  All gauges feature easy programmability for field calibration.

Our competent engineering staff ensure you are provided with the exact hydraulic test equipment for current and future applications which will increase your profitability.

PRINT SPEC SHEET

Standard Features & Specifications
Completely Independent Hydraulic Test System

Completely Independent Dual System (model #07-932-05)

Each system may be used independently or combined together for maximum flows; will deliver different pressures and flows simultaneously.  Two separate workstations for system A & B.

  • 930 Hydraulic Test Stand Schematic

  • 930-Labeled

  • Ordering Instructions

  • Spec Sheet (PDF)

  • System A
    1. Oilgear Pump
    2. Lincoln Motor
    3. Complete Pressure Adjustment (450 - 5000 PSI)
    4. Complete Flow Adjustment(0 - Full GPM)
    5. Pressure and Return Ports
    6. Digital Pressure Gauges (.25% Accuracy)
    7. Digital Supply and Return Flow Meters (1% Accuracy)
    8. Safety Over Pressure Relief Valve
    9. By-Pass Dump Valve
    10. Pump Flow Control Valve
    11. Pump Pressure Control Valve
       
  • System B
    1. Oilgear Pump
    2. Lincoln Motor
    3. Complete Pressure Adjustment (450 - 5000 PSI)
    4. Complete Flow Adjustment (0 - Full GPM)
    5. Pressure and Return Ports
    6. Digital Pressure Gauges (.25% Accuracy)
    7. Digital Supply and Return Flow Meters (1% Accuracy)
    8. Safety Over Pressure Relief Valve
    9. By-Pass Dump Valve
    10. Pump Flow Control Valve
    11. Pump Pressure Control Valve

  • Five Pumps
    1. Oilgear System A Pressure Compensated Pump
    2. Oilgear System B Pressure Compensated Pump
    3. S/C High Pressure Intensifier Pump (10,000 PSI)
    4. Work Sink Drain Pump
    5. Reservoir Kidney Loop Pump
  • Super Clean Filtration - Industry Leading Filtration - Ensures Quality While Increasing Aircraft Component Life
    1. System A & B High Efficiency, Non-Bypass Pressure Filters (3 Micron Absolute)
    2. Reservoir Kidney Loop Filter (3 Micron Absolute)
    3. Sink Drain Filter (3 Micron Absolute)
    4. Reservoir Fill Pump Filter (3 Micron Absolute)
  • 4-Way Directional Flow Control Valve
    Manually Operated 4-Way Directional Flow Control Valve with Complete Flow Control to Either Port A or Port B
     
  • Hedland Digital Low Flow Return Meter with Electric Selector Valve for Testing Internal Leakage of Components (.4 - 7 GPM Standard)
     
  • Operational Warning Lights
    1. System A & B Pressure Filter Condition LED Warning Indicator for Clogged Conditions
    2. Kidney Loop Pump Filter Condition LED Warning Indicator
    3. Reservoir Low Level LED Warning Indicator
    4. High Fluid Temperature LED Warning Indicator
       
  • 3 Each Stand Alone Noshock Pressure Gauges   * Suggested Ranges 0-60 PSI, 0-1000 PSI, 0-7500 PSI
  • Over Pressure Gauge Savers on All Gauges
     
  • Reservoir Kidney Loop Pump
  • Continuously Filters Fluid
  • Continuously Cools Fluid

  • Instrumentation All gauges feature easy programmability for field calibration.
    Five Digital Flow Meters (1% Accuracy)
    1. System A Pump Supply Flow
    2. System B Pump Supply Flow
    3. System A Return Flow
    4. System B Return Flow
    5. Low Range (.4 - 7 GPM)
  • Seven Digital Pressure Gauges (.25% Accuracy)
    1. System A Supply Pressure
    2. System B Supply Pressure
    3. Return Back Pressure
    4. Low Independent Pressure Gauge
    5. Medium Independent Pressure Gauge
    6. High Independent Pressure Gauge
    7. Intensifier Pressure Gauge
       
  • Air Over Oil Intensifier
    1. Digital Pressure Gauge (.25% Accuracy)
    2. Air Shut-Off Valve
    3. Air Regulator
    4. Safety Over Pressure Relief Valve
    5. By-Pass Dump Valve
    6. Dedicated Port
       
  • Safety Features
    1. Two Ergonomically Located Emergency Stop Switch
    2. Safety Over Pressure Relief Valve for Both System A & B
    3. Safety Drip Pan Completely Covers Bottom to Ensure Clean Floors
    4. All Electrical Components Installed in NEMA 4, 12 Enclosure
    5. All Gauges are Fully Enclosed in NEMA 4, 12 Enclosure with a Clear Front Safety Glass Cover
    6. Operational LED Warning Indicator Lights
    7. Dual Heavy Duty Floor Locks to Ensure Stability
    8. Optional Safety Glass Sliding Doors for Work Sink
       
  • Automatic Oil Temperature Control
  • Panel Mounted Oil Temperature Set Point
  • Digital Oil Temperature Gauge
     
  • Return Back Pressure for Dynamically Loading Components
  • Return Back Pressure By-Pass Valve
  • Return Back Pressure, Pressure Adjustment Valve
  • Return Back Pressure, Pressure Gauge
  • Return Back Pressure Flow Meter
     
  • Additional Features
  • All Welded, 14 Gauge B3 (Brushed Finish) Stainless Steel Cabinet
  • Illuminated Work Area Provided By Overhead Sink Light
  • Test Port for all Pressure Gauges
  • Easy Access Exterior Fluid Sampling Valve to Meet Quality Parameters
  • Safety Drip Pan Completely Covers Bottom
  • Work Sink with Perforated Metal Grating
  • Heavy Duty All Welded 1/4" Think Wall Tubing Frame with Fork Lift Brackets
  • Easy Maneuvering Ensured By Two Fixed and Two Swivel Castors with Stability Provided by the Heavy Duty Floor Lock
  • Work Sink Drain Pump with Filter (4 GPM)
  • Durable Laser Engraved, Aluminum Placards
  • Panel Mounted Operational Instructions
  • Current Pressure Gauge and Flow Meter Certificates of Calibration


    • Dimensions: Length 112" Width 80" Height 77"