A&P Hydraulics

  
Tel: 910-371-1151
302 S. Shamrock Ave, Landrum SC, 29356


Series 730 Hydraulic Power Unit heavy duty hydraulic power unit.

Series 730, Hydraulic Power Unit

The Series 730 hydraulic power unit (55 - 80 GPM) features 100% duty cycle, will deliver maximum flow at maximum pressure.

For Aircrafts:  Airbus A-300, Airbus A-310, Airbus A-318, Airbus A-319, Airbus A-320, Airbus A-321, Airbus A-330, Airbus A-340, Airbus A-340-600, Airbus A-380, Boeing 787, Boeing 747, Boeing 767, Boeing 777, McDonnell Douglas MD-11 .

PRINT SPEC SHEET

Standard Features & Specifications
Heavy Duty Hydraulic Power Unit

Hydraulic Power Unit (model #05-736-05)

The 730 hydraulic power unit features performance assured 100% duty cycle.

  • 730 Hydraulic Power Unit Schematic

  • 730-Labeled

  • Ordering Instructions

  • Spec Sheet (PDF)

  • Performance Assured 100% Duty Cycle
    1. Will deliver Maximum Flow @ Maximum Pressure
    2. Industrial Duty Lincoln� Motor
    3. Heavy Duty Motor Starter with Over Load Protection
       
  • Panel Mounted Controls for Ease of Operation and Safety
    1. Complete Pump Flow Adjustment (0-Full GPM)
    2. Complete Pump Pressure Adjustment (250-Full PSI)
    3. By-Pass Dump Valve
       
  • Super Clean Filtration - Industry Leading Filtration
    Ensures Quality While Increasing Aircraft
    Component Life and Decreasing Aircraft Filter
    Changes
    1. High Efficiency, Non-Bypass Pressure
      Filter (1 Micron Absolute)
    2. Large Capacity Return Filter (3 Micron Absolute)
  • Instrumentation
    1. High Pressure, Dual Scale Flow Meter (4% accuracy)
    2. Test Quality Pressure Gauge (1% accuracy)
    3. Dual Scale Pyrometer / Oil Temperature Gauge (2% accuracy)
    4. Hour Meter
       
  • Operational Warning Lights
    1. Pressure Filter Condition LED Warning
      Indicator Clogged Conditions
    2. High Fluid Temperature LED Warning
      Indicator
       
  • Durable 0.90 Brushed Aluminum Cabinet Construction
    1. Large Hinged Rear Access Door Provides Convenient
      Access and Inspection
    2. Removable Top Panel for Ease of Access to Unit's Components
    3. No Exterior Paint to Fade or Chip with Usage
    4. Guaranteed Not to Rust

Standard Features:
  • 100% Duty Cycle, Will Deliver
    Maximum Flow @ Maximum Pressure
  • All Welded 0.09 Aluminum Construction
  • Removable Top Panel and Rear Door for Ease
    of Access to Unit's Components
  • High Efficiency Aluminum Oil Cooler with
    3 Phase Fan
  • Stainless Steel Reservoir (200 Gallons)
  • All Electrical Components Installed in
    Liquid Proof Enclosures (NEMA 4, 12)
  • Safety Assured with Exterior Electrical Panel Access
  • Extra Capacity, Reservoir Desiccant
    (Water Absorbing) Breather
  • Heavy Duty All Welded Frame with Fork Lift Tubes
  • Current Pressure Gauge and Flow Meter
    Certificate of Calibration
  • Reservoir Selector Valve
    (To Use Either Aircraft's or Unit's Reservoir)
  • Standard #16 Pressure Hoses and #32 Return Hoses,
    25 ft. (7.62 m) Long
  • Standard 50 ft. (15.2 m) Electrical Input Cable
  • Durable Laser Engraved , Aluminum Placards
  • Panel Mounted Operational Instructions
  • Guaranteed No Leaks, Aluminum Pan
    Completely Covers Bottom
  • Easy Access Exterior Fluid Sampling Valve to
    Meet Quality Parameters
  • Easy Maneuvering Ensured with 8 in. x 3 in. Castors,
    Two Fixed and Two Swivel with Stability Provided
    by the Heavy Duty Floor Lock
  • Heavy Duty Stainless Steel Bracket for Hose
    and Electrical Input Cord Storage


Dimensions: Length 116 in (294 cm), Width 76 in (193 cm), Height 70 in (177 cm)