Series 620 Hydraulic Power Unit heavy duty hydraulic test unit.
Series 620, Hydraulic Power Unit
The Series 620 hdyraulic power unit (6 - 11 GPM) is a heavy duty hydraulic power unit designed to meet the requirements of smaller regional and corporate aircraft as well as helicopter service facilities.
For Aircrafts: Agusta Puma, Agusta A109A, Agusta Mark II, Bell 214, Bell 214ST, Bell 412, Boeing Apache AH-64, Bombardier Canadair CRJ, Bombardier de Havilland Dash-8 300, Bombardier Learjet 24, Bombardier Learjet 35, Bombardier Learjet 45, Bombardier Learjet 55, Bombardier Learjet 60, Cessna 650 Citation III, Cessna 650 Citation IV, Cessna 650 Citation VII, Cessna 560XL Citation Excel, Cessna 680 Citation Sovereign, Dassault Falcon 20, Dassault Falcon 200, Embraer EMB-110, Embraer EMB-120, Embraer ERJ 135 Legacy, Embraer ERJ 145 Legacy, Eurocopter HH-65-A Dauphin, Eurocopter B0-105, Eurocopter BK-117, Eurocopter AS365N Dauphin 2, Eurocopter AS332 Super Puma, Gulfstream G I, Sikorsky S-61, Sikorsky S-65 CH53, Sikorsky S-65 HH53, Sikorsky S-65 MH53.
Standard Features & Specifications
Heavy Duty Hydraulic Power Unit
Hydraulic Power Unit (model #05-623-05)
The 620 hydraulic power unit is a heavy duty unit designed to meet the requirements of smaller regional and corporate aircraft as well as helicopter service facilities.
-
620 Hydraulic Power Unit Schematic
-
620-Labeled
-
Ordering Instructions
-
Spec Sheet (PDF)
- Performance Assured 100% Duty Cycle
- Will deliver Maximum Flow @ Maximum Pressure
- Industrial Duty Lincoln� Motor
- Heavy Duty Motor Starter with Over Load
Protection
- Panel Mounted Controls for Ease of
Operation and Safety
- Complete Pump Flow Adjustment (0-Full GPM)
- Complete Pump Pressure Adjustment (250-Full PSI)
- By-Pass Dump Valve
- Super Clean Filtration -
Industry Leading
Filtration
Ensures Quality While Increasing Aircraft
Component Life and Decreasing Aircraft Filter
Changes- High Efficiency,
Non-Bypass Pressure
Filter (1 Micron Absolute) - Large Capacity Return Filter (3 Micron
Absolute)
*Desiccant (Water Absorbing) Reservoir Air Breather
- High Efficiency,
Non-Bypass Pressure
- Operational Warning Lights
- Pressure Filter Condition LED
Warning
Indicator Clogged Conditions - Return Filter Condition LED
Warning
Indicator Clogged Conditions
- Pressure Filter Condition LED
Warning
- Instrumentation
- High Pressure Dual Scale Flow Meter (4% accuracy)
- Test Quality 6" Pressure Gauge (1% accuracy)
- Dual Scale Pyrometer / Oil Temperature Gauge
- Hour Meter
(To Schedule Maintenance)
- Durable 0.90 Brushed Aluminum
Cabinet Construction
- Large Hinged Rear Access Door
Provides Convenient
Access and Inspection - No Exterior Paint to Fade or Chip with Usage
- Guaranteed Not to Rust
- Large Hinged Rear Access Door
Provides Convenient
- High Efficiency Aluminum Oil
Cooler with
3 Phase Electric Fan - Stainless Steel Reservoir (20 Gallons)
- Reservoir Selector Valves
(to use either aircraft's or unit's reservoir) - Standard #8 Pressure Hose and #12 Return Hose, 15 ft. (4.5 m) Long
- Standard 50 ft. (15.2 m) Electrical Input Cable
- All Welded .090 Aluminum Construction
- Heavy Duty Welded Frame
- All Electrical Components Installed in Liquid Tight Enclosure (NEMA 4, 12)
- Current Pressure Gauge and
Flow Meter
Certificate of Calibration
- Guaranteed No Leaks, Aluminum Pan Completely Covers Bottom of Unit
- Durable Aluminum, Laser Engraved Placards
- Panel Mounted Operational Instructions
- Easy Access Exterior Fluid
Sampling Valve to
Meet Quality Parameters - Easy Maneuvering Ensured with Two Fixed and Two Swivel Castors and Stability Provided by the Heavy Duty Floor Lock
- Heavy Duty Bracket for
Hose and Electrical Input
Cord Storage - Large Hinged Rear Access Door Provides Convenient Access and Inspection
Dimensions: Length 69 in (175 cm), Width 36 in (91 cm), Height 40 in (102 cm)