A&P Hydraulics

  
Tel: 910-371-1151
9283 Industrial Blvd., Leland, NC 28451


Series 920 Hydraulic Test Stand 50-80 GPM Universal, Independent Dual System hydraulic test stand

Series 920, 50-80 GPM Universal, Independent Dual System Hydraulic Test Stand

The Series 920 hydraulic test stand features independent dual systems, high pressure intensifier, pump test unit for testing pumps, and variable frequency drive for precise RPM control for testing pumps.

  1. Dual, independent hydraulic test system for testing all hydraulic components such as reducing valves, linear actuators and related components
  2. Universal hydraulic test stand hydraulic pump and motor test system for testing all hydraulic pumps and motors.

  

PRINT SPEC SHEET

Standard Features & Specifications
Dual Independent Hydraulic Test System

Completely Independent Dual System (model #07-924-05)

Each system may be used independently or combined together for maximum flows.  Will deliver different pressures and flows simultaneously.  Two separate work stations for System A and B.

  • Hydraulic Test Stand Schematic

  • Pump Test Stand Schematic

  • Ordering Instructions

  • Spec Sheet (PDF)

  • System A
    1. Oilgear Pump
    2. Lincoln Motor
    3. Complete Pressure Adjustment (450 - 5000 PSI)
    4. Complete Flow Adjustment(0 - Full GPM)
    5. Pressure and Return Ports
    6. Digital Pressure Gauges (.25% Accuracy)
    7. Digital Supply and Return Flow Meters (1% Accuracy)
    8. Safety Over Pressure Relief Valve
    9. By-Pass Dump Valve
    10. Pump Flow Control Valve
    11. Pump Pressure Control Valve
       
  • System B
    1. Oilgear Pump
    2. Lincoln Motor
    3. Complete Pressure Adjustment (450 - 5000 PSI)
    4. Complete Flow Adjustment (0 - Full GPM)
    5. Pressure and Return Ports
    6. Digital Pressure Gauges (.25% Accuracy)
    7. Digital Supply and Return Flow Meters (1% Accuracy)
    8. Safety Over Pressure Relief Valve
    9. By-Pass Dump Valve
    10. Pump Flow Control Valve
    11. Pump Pressure Control Valve

  • Five Pumps
    1. Oilgear System A Pressure Compensated Pump
    2. Oilgear System B Pressure Compensated Pump
    3. S/C High Pressure Intensifier Pump (10,000 PSI)
    4. Work Sink Drain Pump
    5. Reservoir Kidney Loop Pump
  • Super Clean Filtration - Industry Leading Filtration - Ensures Quality While Increasing Aircraft Component Life
    1. System A & B High Efficiency, Non-Bypass Pressure Filters (3 Micron Absolute)
    2. Reservoir Kidney Loop Filter (3 Micron Absolute)
    3. Sink Drain Filter (3 Micron Absolute)
    4. Reservoir Fill Pump Filter (3 Micron Absolute)
  • 4-Way Directional Flow Control Valve
    Manually Operated 4-Way Directional Flow Control Valve with Complete Flow Control to Either Port A or Port B
     
  • Hedland Digital Low Flow Return Meter with Electric Selector Valve for Testing Internal Leakage of Components (.4 - 7 GPM Standard)
     
  • Operational Warning Lights
    1. System A & B Pressure Filter Condition LED Warning Indicator for Clogged Conditions
    2. Kidney Loop Pump Filter Condition LED Warning Indicator
    3. Reservoir Low Level LED Warning Indicator
    4. High Fluid Temperature LED Warning Indicator
       
  • 3 Each Stand Alone NoshockPressure Gauges (.25% Accuracy)  * Suggested Ranges 0-100 PSI, 0-1000 PSI, 0-6000 PSI
  • Over Pressure Gauge Savers on All Gauges
     
  • Reservoir Kidney Loop Pump
  • Continuously Filters Fluid
  • Continuously Cools Fluid



  • Dimensions: Length 225" Width 85" Height 88"